| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCB2100 User's Guide
Introduction Setup Theory of Operation Writing Programs 
Example Programs BLINKY 
Building BLINKY Downloading BLINKY Debugging BLINKY Checking Serial Output BLINKYCAN Building BLINKYCAN Downloading BLINKYCAN Debugging BLINKYCAN Checking Serial Output BLINKY IRQ Debug I/ODownloading BLINKY
When the BLINKY build is complete, you may download the application to the MCB2140 using either:
- The Keil ULINK USB-JTAG Adapter, or
- The Flash Magic utility.
Note
- To debug this example, you must use the Keil ULINK USB-JTAG Adapter.
The BLINKY application starts executing when you press RESET on the MCB2100 board to verify the program downloaded.
Note
- You may enable the option Update Target before Debugging to download the BLINKY project whenever you start a Debug Session.
The downloaded program is ready for debugging.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
