|
|||
| Products Download Events Support Videos | |||
Technical Support
On-Line Manuals
MCB1700 User's Guide
Introduction
Setup
Theory of Operation
Block Diagram
Schematics
Technical Data
Prototyping Area
Microcontroller
Power Supply
JTAG Interface
ETM Interface
LCD Panel
LEDs
Push Buttons
Joystick
Potentiometer
Speaker
Serial Ports
CAN Interface
USB Interface
Ethernet Interface
MicroSD Connector
Writing Programs
Example Programs
MCB1700 User's Guide
Technical Data
| Parameter | Description |
|---|---|
| Supply Voltage | 5V DC (provided by the USB bus of a PC), or or 6.5 - 9 Volts DC from an external power supply. |
| Supply Current | 65mA typical, 120mA maximum |
| XTAL Frequency | 12 MHz |
| Microcontroller | NXP LPC1768 |
| Peripherals | 2 × RS232 Interfaces, 2 × CAN Interfaces, 1 × Ethernet Interface, 1 × JTAG Interface, 1 × ETM Interface, 2 × Cortex Debug Interfaces, 1 × LCD Display, 1 × USB Device/Host/OTG Interface, 1 × Analog Output (connected to speaker by default) 1 × Analog Input (connected to potentiometer by default) |
| Board Size | 120mm x 120mm (4.75" x 4.75"). |
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Buy |
|
 |
|||
