| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCB1700 User's Guide
Introduction Setup Theory of Operation Writing Programs 
Example Programs BLINKY 
Building BLINKY Downloading BLINKY 
Debugging BLINKY Checking Program OutputChecking Program Output
To check the program output from the BLINKY program, start the program running either from the debugger via JTAG or by cycling power on the board. The 8 LEDs will flash sequentially indicating that the program is running normally.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
