Keil Logo

Stand Alone Utility

Downloading with the Flash Magic utility requires the following steps to download code to the LPC1227FBD64/301's on-chip Flash ROM.

To configure the MCB1200 Evaluation Board for Flash programming, select and start Programs — Flash Magic — Flash Magic.

  1. Select COM 2 for the COM Port, specify 9600 as the Baud Rate, and select the LPC1227/301 as the Device.

  2. Enable Erase blocks used by Hex File.

  3. Select the Hex File, for example: root\ARM\BOARDS\KEIL\MCB1200\BLINKY\BLINKY.HEX.

  4. Flash Magic Advanced Options DialogIn the Options — Advanced Options dialog, select the Hardware Config tab, then check the Use DTR and RTS to control RST and ISP pin check box.
  5. Click Start to download the Hex File into the Flash ROM of the LPC1227FBD64/301.

    Flash Magic Dialog

    In case of errors, check the COM connection and jumper settings

    • J5 & J6 — ON
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.