Installing a LIC

To Activate a Single-User License, You Must...

1. Install the software product on the workstation.
2. Obtain a LIC to activate the Single-User License.

For Computers Connected to the Internet...

1. In µVision, open the File — License Management... dialog and select the Single-User License tab.
2. Click on the Get LIC via Internet... button. This opens the License Management page on the Keil web site.
3. Enter the Product Serial Number (PSN) for the Single-User License along with your contact information and click on the Submit button.
4. Within a few minutes you will receive a License ID Code (LIC) via an automated e-mail process. To activate your Software Product, enter the LIC in the New License ID Code (LIC) field in the License Management... dialog and click Add LIC.
   
   

For Computers Not Connected to the Internet...

• Visit the following web page (on a computer with internet access)
  
  http://www.keil.com/license/install.htm
  
  and enter the requested product information. The Computer ID (CID) must be obtained from the File — License Management... dialog on the computer where the license will be installed.

Note

• If you do not have a PSN, contact the Keil Software Sales Department or your local Keil Software Distributor.
• Do not change any Network Connection on your Computer during the registration process. The CID encodes various parameters including network adapter information. After product activation, the network adapter may change as is the case on portable Notebooks with various network connections.
• The CID encodes several computer parameters including a time stamp. This causes the CID to change daily. However, you may install a LIC any time, provided that the same Network Connection is active.