Programming Algorithm

This section shows the programming algorithm used for each device along with its parameters Device Type, Device Size, and Address Range. µVision uses the information to write to each device.

Once a programming algorithm has been highlighted, the Start and Size text boxes are enabled, and you can change the address range for the Flash device:

• Start address of the Flash device. You may change the address only for an external flash. For an internal flash, the start address should not be changed.
• Size of the Flash device.

µVision includes definitions and programming algorithms for on-chip Flash memory. You can select a device from the list and change its configuration details.

Click the button

• Add to select a programming algorithm from a list of algorithms.
• Remove to delete the highlighted programming algorithm from the list.

While µVision provides programming algorithms for a number of standard devices, you might have to create programming algorithms for a new device.