|
|||
| Products Download Events Support Videos | |||
Technical Support
On-Line Manuals
MDK-ARM Primer
Introduction
Create Application
Create Project File
Select Device
Set Options for Target
Create Source File
Configure ARM7/9 Target
Configure Startup Code
Library Retarget File
Low Level I/O Routines
Configure Cortex-M Target
Configure Startup Code
CMSIS
Library Retarget File
Low Level I/O Routines
Create File Group
Specify Memory Layout
Build Project
Flash Application
Debug Application
Use on-chip Peripherals
Appendix: Migrate RL-ARM to MDK-Professional
MDK-ARM Primer
Select Device
When you create a new project, µVision4 asks you to select a microcontroller. This step customizes the µVision4 environment with pre-configured options and sets the tool options, peripherals, and dialogs for that particular device. The Select Device for Target dialog shows the µVision Device Database.
-
Select the microcontroller you use. For this example, choose
the STMicoelectronics - STM32F103RB.
- Click OK.
-
Click Yes to add the startup-code, which is provided for
most devices. The startup-code provides configuration settings for
the selected device.
- On some devices, additional parameters must be entered manually. Read carefully the information provided under Description of the Select Device dialog. It might have additional instructions for the device configuration.
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Contact |
|
 |
|||
