Keil Logo

Configure Debug Driver

This section shows the dialog Target Driver Setup, which configures the debug driver interface. The dialog opens from the menu Flash - Configure Flash Tools - Debug - Settings.

Cortex Target Driver Setup

The following data blocks are completed automatically after the debugging environment has been connected and configured:

ULINK USB-JTAG/SW Adapter
Displays driver, device, and firmware data about the ULINK adapter.
JTAG/SW Device Chain
Displays the target device, or devices, connected to the JTAG/SW interface. ULINK shows the IDCODE, Device Name, and IR Length of all JTAG-compatible targets or Serial-Wire (SW) targets it detects.
Debug Driver OK This icon, marking the IDCODE, identifies the device that is being debugged and assures that the device is working.
Debug
Configures the cache, download, and device reset options applied upon RESET.

Start debugging with the default settings. Usually, no further configuration is required.

Note

  • The screen layout and options vary depending on the device and debug driver selected.
  • For details, refer to the User's Guide of the debug adapter in use, or simply click the Help button.
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.