| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
EPM900 User's Guide
Introduction Setup Theory of Operation Using the EPM900 
Example Programs BLINKY 
Building BLINKY Downloading BLINKY Debugging BLINKY Checking Program Output HELLO Building HELLO Downloading HELLO Running HELLODownloading BLINKY
When the BLINKY build is complete, you may download the HEX file to the on-chip Flash ROM of the P89LPC9xx target device.
Click the download button.
When you use the Download command for the first time, you must configure the Flash options under Project - Options for Target - Utilities as described in Configuring the uVision Flash Utilities.
After configuring, the Flash - Download command uses the Keil EPM900 for Flash programming.
The BLINKY application starts executing when you Reset your target device to verify the program downloaded.
Note
- You may enable the option Update Target before Debugging to download the BLINKY project whenever you start a Debug Session.
The downloaded program is ready for debugging.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
