| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
EPM900 User's Guide
Introduction Setup Theory of Operation Using the EPM900 
Example Programs BLINKY 
Building BLINKY Downloading BLINKY Debugging BLINKY Checking Program Output HELLO Building HELLO Downloading HELLO Running HELLODebugging BLINKY
Debug the BLINKY example program following this procedure. The debugged program is ready for the serial output check.
Use the Start/Stop Debug Session toolbar button or the µVision command Debug - Start/Stop Debug Session to connect the debugger to the Keil EPM900 Emulator Board. For details on the debugging features, refer to the µVision User's Guide.
Note
- Debugging the BLINKY program using the µVision debugger requires the EPM900 Emulator Board.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
