Keil Logo Arm Logo

Technical Support

On-Line Manuals

Linker User Guide

Conventions and feedback Overview of the linker Linking models supported by armlink Image structure and generation Using linker optimizations Getting information about images Accessing and managing symbols with armlink Using scatter files About scatter-loading When to use scatter-loading Scatter-loading command-line option Images with a simple memory map Images with a complex memory map Linker-defined symbols that are not defined when s Specifying stack and heap using the scatter file What is a root region? Creating root execution regions Using the FIXED attribute to create root regions Placing functions and data at specific addresses Placing a named section explicitly using scatter-l Placing unassigned sections with the .ANY module s Examples of using placement algorithms for .ANY se Example of next_fit algorithm showing behavior of Examples of using sorting algorithms for .ANY sect Selecting veneer input sections in scatter-loading Using __attribute__((section("name"))) t Using __at sections to place sections at a specifi Restrictions on placing __at sections Automatic placement of __at sections Manual placement of __at sections Placing a key in flash memory using __at Placing a structure over a peripheral register usi Placement of sections with overlays About placing ARM C and C++ library code Example of placing code in a root region Example of placing ARM C library code Example of placing ARM C++ library code Example of placing ARM library helper functions Reserving an empty region About creating regions on page boundaries Overalignment of execution regions and input secti Using preprocessing commands in a scatter file Expression evaluation in scatter files Using expression evaluation in a scatter file to a Equivalent scatter-loading descriptions for simple Type 1 image, one load region and contiguous execu Type 2 image, one load region and non-contiguous e Type 3 image, two load regions and non-contiguous Scatter file to ELF mapping

Example of placing code in a root region

Example of placing code in a root region

Use a scatter file to specify a root section in the same way as a named section. The following example uses the section selector InRoot$$Sections to place all sections that must be in a root region:

Example 30. Specifying a root region

ROM_LOAD 0x0000 0x4000
{
  ROM_EXEC 0x0000 0x4000      ; root region at 0x0
  {
    vectors.o (Vect, +FIRST)  ; Vector table
    * (InRoot$$Sections)      ; All library sections that must be in a
                              ; root region, for example, __main.o,
                              ; __scatter*.o, __dc*.o, and * Region$$Table
  }
  RAM 0x10000 0x8000
  {
    * (+RO, +RW, +ZI)         ; all other sections
  }
}

Copyright © 2007-2008, 2011-2012 ARM. All rights reserved.ARM DUI 0377D
Non-ConfidentialID062912

Keil logo

Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.