Linker User Guide

Image$$ execution region symbols

ARM Compiler toolchain v5.02 for µVision Using the Linker

Home > Accessing and managing symbols with armlink > Image$$ execution region symbols

Image$$ execution region symbols

The following table shows the symbols that the linker generates for every execution region present in the image. All the symbols refer to execution addresses after the C library is initialized.

Table 4. Image$$ execution region symbols

Symbol	Description
`Image$$region_name$$Base`	Execution address of the region.
`Image$$region_name$$Length`	Execution region length in bytes excluding ZI length.
`Image$$region_name$$Limit`	Address of the byte beyond the end of the non-ZI part of the execution region.
`Image$$region_name$$RO$$Base`	Execution address of the RO output section in this region.
`Image$$region_name$$RO$$Length`	Length of the RO output section in bytes.
`Image$$region_name$$RO$$Limit`	Address of the byte beyond the end of the RO output section in the execution region.
`Image$$region_name$$RW$$Base`	Execution address of the RW output section in this region.
`Image$$region_name$$RW$$Length`	Length of the RW output section in bytes.
`Image$$region_name$$RW$$Limit`	Address of the byte beyond the end of the RW output section in the execution region.
`Image$$region_name$$ZI$$Base`	Execution address of the ZI output section in this region.
`Image$$region_name$$ZI$$Length`	Length of the ZI output section in bytes.
`Image$$region_name$$ZI$$Limit`	Address of the byte beyond the end of the ZI output section in the execution region.

Linker User Guide

Image$$ execution region symbols

Image$$ execution region symbols

See also

Products

Development Tools

Hardware & Collateral

Downloads

Support

Buy

Important information