Keil Logo Arm Logo

_clock_init()

_clock_init()

Defined in rt_misc.h, this is an initialization function for clock(). It is not part of the C library standard, but is supported by the ARM C library as an extension.

Show/hideSyntax

void _clock_init(void);

Show/hideUsage

This is a function that you can re-implement in an implementation-specific way. It is called from the library initialization code, so you do not have to call it from your application code.

Note

You must re-implement this function if you re-implement clock().

The initialization that _clock_init() applies enables clock() to return the time that has elapsed since the program was started.

An example of how you might re-implement _clock_init() might be to set the timer to zero. However, if your implementation of clock() relies on a system timer that cannot be reset, then _clock_init() could instead read the time at startup (when called from the library initialization code), with clock() subsequently subtracting the time that was read at initialization, from the current value of the timer. In both cases, some form of initialization is required of _clock_init().

Show/hideSee also

Reference

Using ARM C and C++ Libraries and Floating-Point Support:

Copyright © 2011-2012 ARM. All rights reserved.ARM DUI 0589B
Non-ConfidentialID062912

Keil logo

Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.