Keil Logo

Technical Support

On-Line Manuals

Assembler User Guide

Preface Overview of the Assembler Overview of the ARM Architecture Structure of Assembly Language Modules Writing ARM Assembly Language Condition Codes Using the Assembler Symbols, Literals, Expressions, and Operators VFP Programming Assembler Command-line Options ARM and Thumb Instructions ARM and Thumb instruction summary Instruction width specifiers Flexible second operand (Operand2) Syntax of Operand2 as a constant Syntax of Operand2 as a register with optional shi Shift operations Saturating instructions Condition code suffixes ADC ADD ADR (PC-relative) ADR (register-relative) ADRL pseudo-instruction AND ASR B BFC BFI BIC BKPT BL BLX BX BXJ CBZ and CBNZ CDP and CDP2 CLREX CLZ CMP and CMN CPS CPY pseudo-instruction DBG DMB DSB EOR ERET HVC ISB IT LDC and LDC2 LDM LDR (immediate offset) LDR (PC-relative) LDR (register offset) LDR (register-relative) LDR pseudo-instruction LDR, unprivileged LDREX LSL LSR MCR and MCR2 MCRR and MCRR2 MLA MLS MOV MOV32 pseudo-instruction MOVT MRC and MRC2 MRRC and MRRC2 MRS (PSR to general-purpose register) MRS (system coprocessor register to ARM register) MSR (ARM register to system coprocessor register) MSR (general-purpose register to PSR) MUL MVN NEG pseudo-instruction NOP ORN (Thumb only) ORR PKHBT and PKHTB PLD and PLI POP PUSH QADD QADD8 QADD16 QASX QDADD QDSUB QSAX QSUB QSUB8 QSUB16 RBIT REV REV16 REVSH RFE ROR RRX RSB RSC SADD8 SADD16 SASX SBC SBFX SDIV SEL SETEND SEV SHADD8 SHADD16 SHASX SHSAX SHSUB8 SHSUB16 SMC SMLAxy SMLAD SMLAL SMLALD SMLALxy SMLAWy SMLSD SMLSLD SMMLA SMMLS SMMUL SMUAD SMULxy SMULL SMULWy SMUSD SRS SSAT SSAT16 SSAX SSUB8 SSUB16 STC and STC2 STM STR (immediate offset) STR (register offset) STR, unprivileged STREX SUB SUBS pc, lr SVC SWP and SWPB SXTAB SXTAB16 SXTAH SXTB SXTB16 SXTH SYS TBB and TBH TEQ TST UADD8 UADD16 UASX UBFX UDIV UHADD8 UHADD16 UHASX UHSAX UHSUB8 UHSUB16 UMAAL UMLAL UMULL UND pseudo-instruction UQADD8 UQADD16 UQASX UQSAX UQSUB8 UQSUB16 USAD8 USADA8 USAT USAT16 USAX USUB8 USUB16 UXTAB UXTAB16 UXTAH UXTB UXTB16 UXTH WFE WFI YIELD VFP Instructions Directives Reference Via File Syntax

BXJ

10.24 BXJ

Branch and change to Jazelle state.

Syntax

BXJ{cond} Rm
where:
cond
is an optional condition code. cond is not available on all forms of this instruction.
Rm
is a register containing an address to branch to.

Operation

The BXJ instruction causes a branch to the address contained in Rm and changes the instruction set state to Jazelle.

Instruction availability and branch ranges

The following table shows the BXJ instructions that are available in ARM and Thumb state. Instructions that are not shown in this table are not available. Notes in brackets show the first architecture version where the instruction is available.

Table 10-9 BXJ instruction availability and range

Instruction ARM   Thumb, 16-bit encoding Thumb, 32-bit encoding
BXJ Rm Available (5J, 6) -   Available (All T2 except ARMv7-M)
BXJ{cond} Rm Available (5J, 6) -   - -

Register restrictions

You can use SP for Rm in the BXJ ARM instruction but this is deprecated in ARMv6T2 and above.
You cannot use SP in the BXJ Thumb instruction.

Condition flags

The BXJ instruction does not change the flags.

Architectures

See the preceding table for details of availability of the BXJ instruction in each architecture.
Non-ConfidentialPDF file icon PDF versionARM DUI0379H
Copyright © 2007, 2008, 2011, 2012, 2014-2016 ARM. All rights reserved. 
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.