 RealView Assembler User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
RealView Assembler User's Guide
Preface Introduction Writing ARM Assembly Language Assembler Reference 
ARM and Thumb Instructions 
Instruction summary Memory access instructions Address alignment LDR and STR (immediate offset) LDR and STR (register offset) LDR and STR (User mode) LDR (pc-relative) ADR PLD, PLDW, and PLI LDM and STM PUSH and POP RFE SRS LDREX and STREX CLREX SWP and SWPB General data processing instructions Flexible second operand ADD, SUB, RSB, ADC, SBC, and RSC SUBS pc, lr AND, ORR, EOR, BIC, and ORN CLZ CMP and CMN MOV and MVN MOVT TST and TEQ SEL REV, REV16, REVSH, and RBIT ASR, LSL, LSR, ROR, and RRX SDIV and UDIV Multiply instructions MUL, MLA, and MLS UMULL, UMLAL, SMULL, and SMLAL SMULxy and SMLAxy SMULWy and SMLAWy SMLALxy SMUAD{X} and SMUSD{X} SMMUL, SMMLA, and SMMLS SMLAD and SMLSD SMLALD and SMLSLD UMAAL Saturating instructions Saturating arithmetic QADD, QSUB, QDADD, and QDSUB SSAT and USAT Parallel instructions Parallel add and subtract USAD8 and USADA8 SSAT16 and USAT16 Packing and unpacking instructions BFC and BFI SBFX and UBFX SXT, SXTA, UXT, and UXTA PKHBT and PKHTB Branch and control instructions B, BL, BX, BLX, and BXJ IT CBZ and CBNZ TBB and TBH Coprocessor instructions CDP and CDP2 MCR, MCR2, MCRR, and MCRR2 MRC, MRC2, MRRC and MRRC2 LDC, LDC2, STC, and STC2 Miscellaneous instructions BKPT SVC MRS MSR CPS SMC SETEND NOP, SEV, WFE, WFI, and YIELD DBG, DMB, DSB, and ISB Instruction width selection in Thumb Instruction width specifiers, .W and .N Different behavior for some instructions Diagnostic warning ThumbEE instructions ENTERX and LEAVEX CHKA HB, HBL, HBLP, and HBP Pseudo-instructions ADRL pseudo-instruction MOV32 pseudo-instruction LDR pseudo-instruction UND pseudo-instruction Directives ReferenceCLREX
| |||
| Home > ARM and Thumb Instructions > Memory access instructions > CLREX | |||
Clear Exclusive. Clears the local record of the executing processor that an address has had a request for an exclusive access.
CLREX{cond}
where:
condis an optional condition code (see Conditional execution).
Note
condITinstruction. This is an unconditional instruction in ARM.
Use the CLREX instruction to return a closely-coupled exclusive access monitor to its open-access state. This removes the requirement for a dummy store to memory. See ARM Architecture reference Manual for more information on synchronization primitive support.
It is implementation defined whether CLREX also clears the global record of the executing processor that an address has had a request for an exclusive access.
| Copyright © 2007, 2008 ARM Limited. All rights reserved. | ARM DUI 0379B |
| Non-Confidential | Unrestricted Access |
 PDF version | |
| Home > ARM and Thumb Instructions > Memory access instructions > CLREX |
| Contact Site Map Press Privacy | Copyright © 2010 Keil™, An ARM® Company. All rights reserved. |
