 Technical Support | |
| Home Products Events Support | |
Technical Support
Support Resources
- Support Knowledgebase
- Product Manuals
- Application Notes
- File Download Area
- Product Updates
- Discussion Forum
- Books
Product Information
MCBSTR9: PB.8 + PB.9 LED PROBLEM
Information in this article applies to:
- MCBSTM32 Evaluation Board - Version 1
QUESTION
It seems that there is a shortage between LED PB.8 and PB.9 on MCBSTM32 Version 1.
Is this a known issue?
ANSWER
The problem is that the CAN driver interferes with the LED outputs. You may either remove resistor R38 or change the value of this resistor to 1KOhm.
Last Reviewed: Friday, August 03, 2007
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
