 Technical Support | |
| Home Products Events Support | |
Technical Support
Support Resources
- Support Knowledgebase
- Product Manuals
- Application Notes
- File Download Area
- Product Updates
- Discussion Forum
- Books
Product Information
ARTX: NO DHCP ADDRESS FROM WINDOWS 2003 SERVER
Information in this article applies to:
- ARTX-ARM Version 1.00
- ARTX-166 Version 1.10
QUESTION
I configured the TCP/IP stack to retrieve an IP address from a DHCP service on my network. The DHCP server is a Windows 2003 Server, but my system does not receive an address and does not use the one that is pre-configured. What could be wrong?
ANSWER
The behavior of the DHCP service in Windows 2003 does not appear to be standard. Until there is a fix in ARTX, you may use the following work-around:
- Open the file ANet_Config (for ARTX-ARM) or AT166_Config (for ARTX-166) in Configuration Wizard mode.
- Goto Ethernet Network Interface - Local IP Address.
- Change Address bytes 1, 2, 3 and 4 to 0.
You should only use this work-around in environments that have a DHCP service available.
Last Reviewed: Friday, May 13, 2005
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
