Technical Support

ULINK: FLASH PROGRAMMING OF PHILIPS LPC2000 FAILS

---

Information in this article applies to:

• ULINK USB-JTAG Adapter
• DKARM Version 1.1

---

SYMPTOM

When I try to program the flash of my LPC2000 device via the ULINK USB-JTAG Adapter, I receive a message "Flash Download failed" or "Flash Time Out".

CAUSE

Early versions of the Flash Algorithms for the LPC2000 did not configure the PLL but were relying on the fact that the XTAL frequency is identical to the CPU clock.

RESOLUTION

The problem is corrected in CARM V1.2a

Using the new algorithms, ULINK provides high speed Flash programming for Philips LPC2100 device series with a download rate of up to 16 Kbytes per second.

Last Reviewed: Sunday, January 28, 2007

---

Did this article provide the answer you needed?
Yes No Not Sure