EPM900: EMULATION AND PROGRAMMING ADAPTERS

Information in this article applies to:

• EPM900 LPC Emulator

QUESTION

Where can I purchase programming and emulation adapters for the EPM900?

ANSWER

EPM900 has a flexible header system that can be used with various emulation and programming adapters. Philips offers several Emulation and Programming adapters on the web site.

Emulation Adapters for EPM900

• LPC93x Emulation Adapters:
• Flyto adapters are available for all housing variants of the LPC93x devices. You need to purchase a S-D28A LPC9xx Emul.Adapt. (DIP28(600mil)->A30) and a bottom part S-900-x28 that converts it to PLCC28, HVQFN28, or TSSOP28 housing.
• LPC92x Emulation Adapters:
• Flyto adapters are available for all housing variants of the LPC92x devices. You need to purchase a S-D28A LPC9xx Emul.Adapt. (DIP28(600mil)->A30) and a bottom part S-900-x20 that converts it to TSSOP20 or DIP20 housing.
• LPC91x Emulation Adapters:
• We recommend to use the Flyto adapters that are available for all housing variants of the LPC91x devices. You need to purchase a S-D28A LPC9xx Emul.Adapt. (DIP28(600mil)->A30) and a bottom part S-900-x14x that converts it to TSSOP14 or DIP14 housing.
• LPC90x Emulation Adapters:
• We recommend to use the Flyto adapters that are available for all housing variants of the LPC90x devices. You need to purchase a S-D28A LPC9xx Emul.Adapt. (DIP28(600mil)->A30) and a bottom part S-900-x8x that converts it to SO8 or DIP8 housing.

Programming Adapters for EPM900.

• LPC93x Programming Adapters: Aprilog adapters are available for PLCC28 or TSSOP28 housing. The Philips PAB900 is an add-on board for Keil EPM900 and MCB900 that supports various TSSOP and DIP packages.
• LPC92x Programming Adapters: The Philips PAB900 is an add-on board for Keil EPM900 and MCB900 that supports various TSSOP and DIP packages.
• LPC91x Programming Adapters:
• The Philips PAB900 is an add-on board for Keil EPM900 and MCB900 that supports various TSSOP and DIP packages.
• LPC90x Programming Adapters:
• The Philips PAB900 is an add-on board for Keil EPM900 and MCB900 that supports various TSSOP and DIP packages.

MORE INFORMATION

• Refer to Connecting the Device in the EPM900 User's Guide.

SEE ALSO

• EPM900 Programming Adapters

FORUM THREADS

The following Discussion Forum threads may provide information related to this topic.

• EPM900 as parallel programmer?

Last Reviewed: Tuesday, January 09, 2007