 Technical Support | |
| Home Products Events Support | |
Technical Support
Support Resources
- Support Knowledgebase
- Product Manuals
- Application Notes
- File Download Area
- Product Updates
- Discussion Forum
- Books
Product Information
EPM900: SECTOR ZERO ERASE FAILED
Information in this article applies to:
- EPM900 LPC Emulator
QUESTION
I have a problem with EPM900. When I attempt to program my LPC932 device I receive the following error:
*** Error: Sector zero erase failed
What is the reason for this error?
ANSWER
This error appears when you have a protection assigned over User Security Bytes using SECx where x is the sector number.
Sector 0 security is controlled by SEC0. You must make sure that SEC0 is not blocking programming. The easiest way to do that is to leave it unprogrammed. In the startup code (START900.A51), make sure you leave SEC0 set to zero. Also, make sure that it is set to zero under Options for Target - Utilities - LPC900 EPM Emulator/Programmer Settings - SEC0:.
MORE INFORMATION
Last Reviewed: Thursday, January 25, 2007
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
