ULINK: REINSTALLING USB DRIVER

Information in this article applies to:

• ULINK USB-JTAG Adapter

QUESTION

Is there a way to re-install the USB driver of the Keil ULINK Adapter?

ANSWER

Yes. Reinstalling the ULINK driver is described in ULINK: DRIVER PROBLEM GIVES NO USB DEVICE FOUND. This process works in almost all cases.

In some rare situations, the Windows Operating System creates OEM files that cannot be removed automatically. To delete this file, proceed as follows:

1. Uninstall the USB Driver: Keil ULINK
   • Connect the Keil ULINK Adapter to your PC.
   • Right-click on My Computer and open the Properties dialog.
   • Click on Device Manager and select Universal Serial Bus - Keil ULINK.
   • Right-Click on Keil ULINK and select Uninstall
2. Delete all *.INF files containing USB\VID_c251&PID_2710
   • Use Start - Search - For Files or Folders. Specify *.INF as file name, USB\VID_C251&PID_2710 as search text, the base folder of your operating system as search location (typically this is c:\WINNT\ for Windows 2000/XP computers or c:\WINDOWS\ for Windows 98/ME computers).
   • Start Search. This should bring up a list of INF files (like KeilUL.INF and OEM14.INF). Delete these files.
3. Delete all KeilUL.SYS and KeilUL0.SYS Files
   • Delete the files KeilUL.SYS and KeilUL0.SYS that are in the drivers folder of your computer. For Windows 2000/XP the files are typically in c:\WINNT\System32\Drivers. For Windows 98/ME the files are typically in c:\WINNT\System32\Drivers.

MORE INFORMATION

• Search the trouble shooting section of the Windows operating system under Start - Help

SEE ALSO

• ULINK: ARM DEBUGGER CRASHES
• ULINK: DRIVER PROBLEM GIVES NO USB DEVICE FOUND
• GENERAL: USB DRIVER FOR ULINK / EPM900

FORUM THREADS

The following Discussion Forum threads may provide information related to this topic.

• Using ULink debugger with XC164CS

Last Reviewed: Sunday, January 28, 2007