µVISION: Using Parts Not Listed in the Device Database

Information in this article applies to:

• µVision Version 2.07

QUESTION

What can I do if the device I am using is not listed in the device database in µVision?

ANSWER

There are three separate actions you may take:

1. Add a new part to the device database or
2. Select a part that is close in operation and has similar features to the chip you will use or
3. Select a generic part until the chip you use is added to the device database.

SEE ALSO

• µVision: Adding Custom Parts to the Device Database
• µVision: Adding a User-specific Device Database (CDB File)
• Refer to Adding Support for New Devices in MDK Version 5 from Application Note 254.

Last Reviewed: Wednesday, December 16, 2020