MCB1800
Evaluation Board and Starter Kit

The Keil MCB1800 Evaluation Boards enable you to create and test working programs based on the NXP LPC1850 family of ARM Cortex™-M3 processor-based devices.

The MCB1800 Evaluation Board is available in two different configurations:

• The MCB1850 Evaluation Board is populated with an NXP LPC1850 device
• The MCB1857 Evaluation Board is populated with a NXP LPC1857 device

Features

• 180MHz ARM Cortex-M3 processor-based MCU in LBGA256
• On-Chip SRAM: 136KB (LPC1857), 200KB (LPC1850)
• On-Chip Flash: 1MB dual bank (LPC1857), no on-chip Flash (LPC1850)
• On-Board Memory: 16MB NOR Flash, 4MB Quad-SPI Flash, 16 MB SDRAM, & 16KB EEPROM (I2C)
• Color QVGA TFT LCD with touchscreen
• 10/100 Ethernet Port
• High-speed USB 2.0 Host/Device/OTG interface (USB host + Micro USB Device/OTG connectors)
• Full-speed USB 2.0 Host/Device interface (USB host + micro USB Device connectors)
• CAN interfaces
• Serial/UART Port
• MicroSD Card Interface
• 4 user push-buttons + reset
• Digital Temperature Sensor (I2C)
• Analog Voltage Control for ACD Input
• Audio CODEC with Line-In/Out and Microphone/headphone connector + Speaker
• Debug Interface Connectors
  • 20-pin JTAG (0.1 inch)
  • 10-pin Cortex debug (0.05 inch)
  • 20-pin Cortex debug + ETM Trace (0.05 inch)

Development Software

The MCB1800 Evaluation Board and Starter Kit includes the MDK-ARM Lite Edition Tools. These tools help you get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCB1800 evaluation board, and a Quickstart guide are included.