MCB1000
Evaluation Board and Starter Kit

The Keil MCB1000 Evaluation Boards enable you to create and test working programs based on the NXP family of ARM Cortex™-M0 and Cortex-M3 processor-based devices.

It is available in four configurations:

• The MCB1114 is populated with a NXP LPC1114FBD48/302 device
• The MCB11C14 is populated with a NXP LPC11C14FB48/301 device with CAN
• The MCB11U14 is populated with a NXP LPC11U14FB48/201 device with USB
• The MCB1343 is populated with a NXP LPC1343FBD48 device with USB

Features

• 50MHz ARM Cortex-M0 processor-based MCU in 48-pin LQFP (MCB1114, MCB11C14 & MCB11U14)
• 72MHz ARM Cortex-M3 processor-based MCU in 48-pin LQFP (MCB1343)
• On-Chip Memory: 32KB Flash and 8KB RAM (6KB LPC11U14)
• CAN 2.0 Interface (LPC11C14 only)
• USB 2.0 Device (LPC11U14 and LPC1343 only)
• Serial Interface
• Potentiometer for ADC Input
• Up to 42 GPIO
• 8 User LEDs + power
• 4 push-buttons (2 GPIO, ISP, & reset)
• Power via USB connector
• Debug Interface Connectors
  • 10-pin Cortex debug (0.05 inch connector)

Evaluation Software

The MCB1000 Evaluation Boards and Starter Kits include the MDK-Lite development tools. These tools help you get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCB1000 evaluation boards, and a Quickstart guide are included.