stand alone ULink programmer needed

 stand alone ULink programmer needed

Is there stand alone programmer software that uses the ULink or ULink2? I need to program LPC2129s without using the uVision.

Thanks!
Chris

 RE: stand alone ULink programmer needed

Is there stand alone programmer software

yes,FlashMagic, free from http://www.esacademy.com. (financed by Philips)

that uses the ULink or ULink2?

why would you want that?

Erik

 RE: stand alone ULink programmer needed

Well, I have a customer that needs to update a board I did using an LPC2129. I can't get the bootloader to work and money is not an issue. I've always used a ULink through uVision to update the boards but need a stand alone software that my customer can easily use. It looks like Flash Magic uses the bootloader not the ULink? What else can I try? Thanks! -Chris

 RE: stand alone ULink programmer needed

Use uVision in batch mode from the command line; you can use the EVAL version, license is not needed to program devices with a file of any length

http://www.keil.com/support/docs/3061.htm

 RE: stand alone ULink programmer needed

Which is a bit annoying, since you do have to install uVision to get the programmer working...