There isn't the menu for using RDI Flash Programmer

Details	Message
Read-Only Author Kyuwon Lee Posted 10-Sep-2006 21:15 Toolset ARM	There isn't the menu for using RDI Flash Programmer Kyuwon Lee In the "Getting Started User's Guide", there is a guide sucs as below. But I can't see the "RDI Interface Driver" in the full-down menu. there are just "Ulink ARM Debugger" and " Ulink Cortex-M3 Debugger" What's the problem? I am using MDK for ARM 3.02a version. ---------------- Use RDI Flash Programmer Some RDI Drivers (such as the Segger J-LINK) provide Flash download features. These drivers are configured as shown below: In the dialog Project - Options for Target - Utilities select as Target Driver for Flash Programming the RDI Interface Driver. Click the button Settings and select J-LINK Flash Programmer.

Read-Only Author Jon Ward Posted 11-Sep-2006 07:50 Toolset ARM	RE: There isn't the menu for using RDI Flash Programmer Jon Ward Does this help? http://www.keil.com/support/docs/3162.htm Jon

Read-Only Author Kyuwon Lee Posted 11-Sep-2006 17:13 Toolset ARM	RE: There isn't the menu for using RDI Flash Programmer Kyuwon Lee Thanks for your reply. I already all licenses for using J-Link. So it's not a problem of licenses. In case of MKD-ARM V2.5, there is the menu for RDI interface in the dialog Project - Options for Target - Utilities. But in case of MDK-ARM V3.02a, There isn't What's the problem.