UART0 and LPC2148

Next Thread | Thread List | Previous Thread Start a Thread | Settings

Details	Message
Read-Only Author Karl Benkic Posted 19-Jun-2006 07:30 Toolset ARM	UART0 and LPC2148 Karl Benkic Hello! I'm quite new at LPC21XX world and in the beginning I stumble at UART0 problem. I can get it right. I copied example program from Phillips site, try to correct it and no luck. When ever I try to program my KEIL MCB2140 board with ULINK and have UART0 connected I get "NO JTAG device found". Can any one help me on that? Best regards, Karl
Read-Only Author Reinhard Keil Posted 19-Jun-2006 11:08 Toolset ARM	RE: UART0 and LPC2148 Reinhard Keil Might be that you disable the JTAG interface by accident. Take a look to: http://www.keil.com/support/docs/2993.htm

Next Thread | Thread List | Previous Thread Start a Thread | Settings