Keil forum MCB1700 SNMP_Agent & HTTP Server example not able to access Board IP

Options

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MCB1700 SNMP_Agent & HTTP Server example not able to access Board IP

vishal patil over 5 years ago

Hi,

I have mcb1700 Eval Board on which i am trying to run example code SNMP_Agent as well as HTTP server.

I have set jumper E/U to use P2.9 as ENET_MDIO & E/C to use P2.8 as ENET_MDC so that i can use ethernet connection.

In both case as per abstract.txt i used crosslink network cable to connect PC & MCB1700 board.

I am using static ip 192.168.0.1 for my pc.

In both cases i am not able to access MCB1700 with IP "19.168.0.100".

I tried to ping MCB1700 but got host unreacheable.

Anyone have tried these example pl let me know where i am going wrong ? Any soln for this ?
Thanks in advance.