This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to generate a "raw" executable file with Keil?

Hello,

I would like to know if it is possible to generate an executable with only hexadecimal instructions with Keil, to be able to flash it with a bootloader?

Thanks in advance.

Best regards,

Aina

Top replies

Westonsupermare Pier over 5 years ago +1 verified

Like a binary file? Use FromELF utility to convert .AXF to .BIN, or something like HEX2BIN to convert the .HEX

+1 Westonsupermare Pier over 5 years ago

Like a binary file?

Use FromELF utility to convert .AXF to .BIN, or something like HEX2BIN to convert the .HEX
Cancel
Up +1 Down

Cancel
0 Aina R over 5 years ago in reply to Westonsupermare Pier

Hi Westonsupermare Pier,

Yes, this what I needed. Thank you :-)
Cancel
Up 0 Down

Cancel