I installed the Pack stm32l496 and did installed properly. But when I check in device list I find only the F0 or L0. L never shows.
Did you mean, "... L4 never shows" ?
Are you using the free MDK for STM32L0 and STM32F0 ?
This: www2.keil.com/.../mdk
Yes sorry L4 never shows. Yes I am using free MDK for STM32L0. But I need it. Now I will need other L and M Cortex, how can I do this? I will receive a licence shortly but now I should be able to use a small size firmware to test. Thank you for your help.
Well it is only for L0 and F0 - isn't it?
Why would you expect it to support L4? That's neither L0 nor F0 - is it?
"I should be able to use a small size firmware to test."
Yes - use the "Lite" edition: www2.keil.com/.../lite
Right it is done for L0 & M0 but there are packs for L4 to install and when I install the pack it does say that the pack installed properly, so this is my first question: Why it says so and I cannot find the Device L4? Secondly I already installed a full trial version once and I had problem to install the packs. I had to desinstall L0 M0 and when finished with L4 had to reinstall my L0 M0 uVision 5. Now my question is: Is it possible to install 2 uVision 5 in the same computer ?
I need L0 and M0 because I develop with such STM32 Controllers. I need now to have the M4 L4 for new projects. Later I will receive the Licence for the M4 L4.
Surely I miss some info! How to proceed?
Thanks again for your help.
Yes, it is.
But you obviously need to install them in separate locations - otherwise one will just over-write the other.
Of course, once you have the full licence for the M4, the free L0/F0 edition becomes pointless.
Why the delay in the full licence? If you need it now, then just get it now!
Great you answered my questions and confirm my previous problems. I was not sure about the licence, if this could cover all products. No idea what the licence cover and what was ordered. I have no licence yet, even so my customer ordered it several days ago. Do not ask me why I did not managed this. So I was trying to gain some days and make some trials on compiling some of the previous work. Thank you very much for your help. I like to work and recommend Keil products but the licence stuff is too complicated and expensive. I very often move on some other alternative because of this.
Now waiting for the licence. Thanks again for your help.