This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

STM32F3xx_DFP pack installation problem

I downloaded uVision V5.24.2.0 as developing tool for STM32F303RE. With a old version (in another pc) have no problem.
The last version but as opens says that; " The Following Device Family Pack(s) are required by the project:
Keil:STM32F3xx_DFP:2.1.0 "
and gives two options, once I select "install" option, this message pops up "One or more Devices Family Pack Devices are not present, would you like to choose another device?"

The point is in Pack Installer, Keil:STM32F3xx_DFP version 2.1.0 (2018-1-16) is shown as installed.

Any help would be highly appreciated.