This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Utilizing all the accessible flash memory

Hello!

I wanted to load a pretty big file (180kB) to load into the MBC2300 board. But sinces there's no external storage already in the board(besides an SD card), i wanted to use the flash memory.
Theoretically it should be possible, since the flash memory is 512kB. But when you download something to the board, it can't be bigger than 32kB(I think).

So my question is: How can I get this data (180kB) on the board. I only need to read it