keil uv4 silent install

I have resolved the problem.

if run "uv4.exe" directly when the installer is unzipped, there will report an error: "Cannot read TOOLS.ini, please reinstall your toolchain".

Compare the normal installation and unzip installation, i found the "TOOLS.ini" can be updated from "SETUP.ini",

1. Create an empty file named "TOOLS.ini"

2. add the following settings at "UV2" section:
[UV2]

RTEPATH=C:\Keil_v5\ARM\PACK
TOOL_VARIANT=mdk_pro_flex
NAME="Name", "A"
FLEX=8224@**.**.**.**
FLEX_USE=1
FLEX_VARIANT=mdk_pro
LEGACY_CM=1
ORGANIZATION=NXP
EMAIL=**@**.com

3. add "PATH="C:\Keil_v5\ARM\" at "ARMADS" section.

4. Start C:/Keil_v5/UV4/UV4.exe to open the UI.

5. Opend PackInstaller.exe to manage your pack.

I used a script to achieve the automatic installation

I have resolved the problem.

Thanks for the information. Worth noting in case the need arises in the future.

Separate comment:

It's really nice to see someone not just post a question, but clearly show competence, the will to try to find a solution to a problem and the decency to post a solution.

IMHO that is really quite rare nowadays.

Thanks for sharing your solution, but I doubt that this one:
- is working well at your local setting on multiple systems
- is a generic solution for other users
as:
- it depends on the customers licensing solution
- and mandatory registry information missing

Please compare your solutions before publishing, thanks.

Thanks for this, it solved my problem. I was getting a "Make sure RTEPATH is added to TOOLS.INI" error (running in linux using wine) and didn't realize that the RTEPATH needed to go in UV2 until reading this. Now everything seems to be working great.