We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello,
In my debug session, when I tried to display the contents of the external data RAM through the memory window, I see always a value corresponding to the upper 2 nibbles of the address. For example, addresses 0xF000 to 0xF0FF show the value 0xF0, while addresses 0xF100 to 0xF1FF show the value 0xF1.
Displaying the contents of the Flash memory seems fine on the other hand.
Any idea why is the display of the external data RAM not working for me? Many thanks in advance!