This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

CAN Driver Issues

Hello There,

I am trying to integrate the CAN driver for EA 4088 board for some time now. I am using the RTX based solution (CAN does not work without RTOS). I am not able to make it work. I am working with CPU speed of 120 MHz and Peripheral clock set to 60 MHz (The PCLKDIV is set to 0x02).

I am working with the CAN driver provided as part of Keil uVision 4.70 - RTX_CAN.c, CAN_LPC17xx.c, RTX_Config.c, and corresponding header files.

Are there any know issues with this driver?

Thanks
atul