Hallo
Tool : uVision5 uC : XMC4500
How i can Uart2 used in my program? How i must INIT? How i can send?
Hello Wilhelm, at the Pack Installer we do offer an example project for the XMC4500 device by Infineon, called "uart_transmit", which demonstrates the configuration and further UART-handling
XMC_UART0_CH0 is used to reference to the UART0, other UARTs require adaptations here.
This Knowledgebase Article explains the required steps to get access to a project: http://www.keil.com/support/docs/3731.htm
Cheers, Ralf
R.Kopsch Senior Applications Engineer ARM Germany GmbH