This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Can we bulid projects using command line options?

hi all,

I am using xc866 infineon processor.I want to generate .hex file using command prompt option.Is it possible in Keil

Thanks in advance,
Chris

0 Keil Software Support Intl. over 19 years ago

uVision can create a BATCH file from a project file. See: http://www.keil.com/support/docs/2594.htm

Also the tools have a command line invocation. See:

http://www.keil.com/support/man/docs/c51/c51_cm_comppgms.htm

Reinhard
Cancel
Up 0 Down

Cancel
0 erik malund over 19 years ago in reply to Keil Software Support Intl.

xc866 infineon processor.

wat dat

I know of the Philips 866, but not Infineon and it is not in the Keil database.
Has Siemens started second-sourcing the 866?

Erik
Cancel
Up 0 Down

Cancel
0 Keil Software Support Intl. over 19 years ago in reply to erik malund

http://www.keil.com/dd/chip/3844.htm
Cancel
Up 0 Down

Cancel
0 clever dick over 19 years ago in reply to erik malund

Yes it's here

http://www.keil.com/dd/chip/3844.htm
Cancel
Up 0 Down

Cancel
0 erik malund over 19 years ago in reply to clever dick

well, it does not have the 8k IRAM that the P89c668 has, so no second source.

Thanx,

Erik
Cancel
Up 0 Down

Cancel