This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Possible to change the Regs tab in the Project view?

Hello,

Is there a way to adapt the content of the Regs tab in the Project Window? For instance, adding the content of one or more SFR items.

Rgds,

Geert

  • Unfortunately, there is no way to add registers to that window. However, you should be aware of the following:

    • You can add SFRs to the watch window.
    • Dialogs are available (from the Peripherals Menu) for almost all on-chip peripherals. The SFRs for that peripheral are listed there. For example, the P0, P1, P2, P3 SFRs are listed in the I/O Port dialogs.
    Hopefully, these things will help.

    Jon