• State Not Answered
  • Locked Locked
  • Replies 0 replies
  • Subscribers 15 subscribers
  • Views 458 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Device signature mismatch in MCB2300

vybhava s

Hi we are facing problem while erasing the flash using serial port in MCB2300.

Flash Magic version is 3.59.227
Jumpers J10: ON
Jumpers J13: OFF
Jumpers J4: ON

any a operation of the follows gets the same
error of "operation failed. failed to autobaud-step1"

click "ISP/Read Security"
click "ISP/Read Device Signature"
click "Start"

Thanks