Hi,
Has anybody else successfuly ran the SMTP demo on the STR9 demo board?
I've attempted to send a mail via the development board but don't get any results.
The demo never breaks at a specified debug point at the start of the following function:
U16 smtp_cbfunc (U8 code, U8 *buf, U16 buflen, U32 *pvar
However debug does break in the following function:
static void smtp_cback (U8 code)
This function suggests success by returning:
SMTP_EVT_SUCCESS
However no mail is sent via the program.
Unfortunately there are no other posts in the forum to aid further investigation. I have used telnet to connect to our SMTP server and manually sent an email to prove that there is not a problem establishing a connection with the SMTP server.
Any help would be gratefully aprreciated.
Thanks
John
Use a debug version and watch the printed messages on COM2 serial port. Enable the Application Debug to Full debug. This will activate printing of all debug messages from SMTP Client.
Thanks Franc,
I've done this already and reported the messages to Keil support. I've now been advised to run 'wireshark' to analyse the full transmission.
I will report any conclusion/resolution here.