This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

uLink2 - Chaining Multiple STM32 Devices

The uLink2 manual says that it supports chaining multiple devices, with certain restrictions:

http://www.keil.com/support/man/docs/ulink2/ulink2_su_chaining.htm

See also: http://www.keil.com/support/docs/3245.htm

Can anyone confirm if the STM32 meets these requirements?
ie, can I chain multiple STM32 devices on a uLink2?

(from the ST documentation, I think it should be OK...)