str912FW44 modem interface

 str912FW44 modem interface

Hi,
I am working on STR912Fw44 based board that is from OLIMAX board no STR-E912 (red colour) I have configured UART0 for GAM modem interface when I debug I get the response but when I connect the modem to the uart 0 it gives Timeout error dos the board have any problem or what may be the problem

 You need to think more carefully

"board that is from OLIMAX board no STR-E912 (red colour)"

Do you mean "Olimex" ?

"I have configured UART0 for GAM modem interface"

What is a "GAM modem"?

Do you mean "GSM"?

How have you configured it? How are you sure that the configuration is correct?

"when I debug I get the response"

What do you mean by that - what response? from where?
How are you "debugging"?

"when I connect the modem to the uart 0 it gives Timeout error"

What, exactly, gives the "timeout error"?

"does the board have any problem"

For specific problems about specific products, you should ask the manufacturer - ie, Olimex in this case.

Or, provide a link giving full details of the board - and you would also need to give full details of your setup

"what may be the problem"

It is impossible to say from the confused and incomplete information that you have provided!

 RE: confused and incomplete information

Remember: people reading this forum know absolutely nothing whatsoever about you or your project - apart from what you provide explicitly in your post.

Therefore you need to think very carefully about you post, and take care to ensure that you clearly and precisely describe:

* what you are trying to achieve;

* what equipment (including software) you are using;

* what you have done so far;

* what results you are getting;

* what results you were expecting;

* what you have done to account for any discrepancy.

Before posting any source code, be sure to read the instructions carefully: http://www.danlhenry.com/caps/keil_code.png

Don't manually re-type the code into the post - use only copy-and-paste;

Note that TABs don't work (well) - use spaces instead.

Finally, before pressing the 'Post' button, use the 'Preview' to review your post carefully - asking yourself, "will anyone understand this from the post alone without any other information?"