|
programmer circuitNext Thread | Thread List | Previous Thread Start a Thread | Settings | Details | Message |
|---|
Read-Only Author
sachin sharma Posted
20-Jul-2008 03:55 Toolset
None |  programmer circuit sachin sharma i am new in microcontroller programmimng.. i have AT89C2051 microcontroller.. if any body have a sutiable programmer circuit..plz send mee....and also all the programming details .......... sachin_en@yahoo.co.in | | Read-Only Author
erik malund Posted
21-Jul-2008 06:36 Toolset
None | atmel does erik malund for just $25 Erik | | Read-Only Author
Per Westermark Posted
21-Jul-2008 07:01 Toolset
None | Good source for these Atmel cables/adapters? Per Westermark Any good sources for these $25 cables/adapters? I have a customer with a problem, and I contacted Atmel support in Sweden and they couldn't supply any cables, or mention anyone who sold them. They recommended that I should modify an AVR development kit for programming the 8051 chip (inverting the reset signal). I have found a couple of old links to an Atmel document describing the construction, but Atmel has removed the document from their site. If it was a hobby project, I would probably build something simple to connect to the printer port, but I prefer to spend my time working with the software. | |
Next Thread | Thread List | Previous Thread Start a Thread | Settings |
|
