Keil™, An ARM® Company

Discussion Forum

Audio amp simulation

Next Thread | Thread List | Previous Thread Start a Thread | Settings

DetailsMessage
Read-Only
Author
ppp 8
Posted
6-Jul-2008 00:02
Toolset
C51
New! Audio amp simulation

I must simulation of an audio amp using 8051. This is not the standard model but a subcircuit based one which I need made from the data sheet.

haz ne1 the cod3 for it becoze I must have it working very soon.

Read-Only
Author
Cactus Blip
Posted
6-Jul-2008 01:32
Toolset
C51
New! RE: Audio amp simulation

haz ne1 the cod3 for it becoze I must have it working very soon.

kan u geev e-male 4 cod3?

Read-Only
Author
ppp 8
Posted
6-Jul-2008 03:26
Toolset
C51
New! RE: Audio amp simulation

plz send d cod3 v quik to ppp8@hotmail.com

it is now v urg and i require the details imedi8ly

Read-Only
Author
Johnathan Mallund
Posted
6-Jul-2008 12:48
Toolset
C51
New! RE: Audio amp simulation

You are hardly explaining what your problem is. You should give more technical details about what you are doing and what you want to achieve. Otherwise, no one is going to be able to help you out.

Read-Only
Author
Per Westermark
Posted
6-Jul-2008 13:03
Toolset
C51
New! RE: Audio amp simulation

From the writing, this is either a joke, or written by someone who don't know enough to give a better explanation.

Questions made the SMS way can't really be taken seriously.

Read-Only
Author
Andy Neil
Posted
6-Jul-2008 13:58
Toolset
C51
New! Never mind the (SMS) writing...

... the whole idea of using an 8051 to simulate an audio amplifier must be a joke - surely...?!

Read-Only
Author
Stephen Phillips
Posted
7-Jul-2008 05:51
Toolset
C51
New! RE: Never mind the (SMS) writing...

It looks to be a student trying to get an easy solution to there school work. Judging from the 'L33T' speak used. Which is not only silly it's extremely rude and annoying.

Unless he is using one of the mp3 connect C51's. However that still requires a technical explanation of which none is given.

Next Thread | Thread List | Previous Thread Start a Thread | Settings