problem on using rl-arm TCPnet for LPC2468

 problem on using rl-arm TCPnet for LPC2468

hello!
every one!
I can run "easy web programm" provided by keil on the keil setup directory for lpc2468

correctly.When I ping, it can response. and I can browse the web page.
But when I run "http_demo programm" provided by keil on the keil setup directory for lpc2468, My

computer only shows "100Mbps link has been established".when I ping, it has no response. What's

wrong with the programm.
because the http_demo is an example for the rl-arm Tcpnet, and I want to use the Tcpnet, I want to

know how to configure the software. Has anybody used tcpnet successfully?
I hope your reply,thank you! wanggang in P.R.China

 RE: problem on using rl-arm TCPnet for LPC2468

My problem has been solved