MCB2300 V3.1 ETM Connector Pinout Schematic

Details	Message
Read-Only Author Frank Strazzabosco Posted 7-Oct-2007 13:21 Toolset ARM	MCB2300 V3.1 ETM Connector Pinout Schematic Frank Strazzabosco Where can I find the corrected ETM pinout for the MCB2300 Ver 3.1 schematic?

Read-Only Author Peter Keller Posted 8-Oct-2007 01:57 Toolset ARM	RE: MCB2300 V3.1 ETM Connector Pinout Schematic Peter Keller http://www.keil.com/support/man/docs/mcb2300/mcb2300_to_schematics.htm

Read-Only Author Frank Strazzabosco Posted 8-Oct-2007 07:35 Toolset ARM	RE: MCB2300 V3.1 ETM Connector Pinout Schematic Frank Strazzabosco The schematic you posted is ver 3.0, like the one available under the MCB2300 web page is also version 3.0. The version 3.0 schematic is said to be wrong under "problem with ETM connector" references. It says the connector pinout was corrected is version 3.1. Is there a version 3.1 schematic available? Thanks

Read-Only Author Robert Rostohar Posted 8-Oct-2007 22:15 Toolset ARM	RE: MCB2300 V3.1 ETM Connector Pinout Schematic Robert Rostohar You don't need new schematics since there was no error in the schematics of the ETM pin connector. The PCB layout of the ETM was wrong (mirrored) which is now fixed. http://www.keil.com/support/docs/3359.htm