Hi! For a few months i use uVisoin(RealView compiler) from Keil to program the ARM LPC2138 mikrocontroller.I use also the IAP-programing and i don't want to erase or write the main program. How can i do it?
Thanks for any answer.
Best regards
Peclare
I do not fully understand this question. Is it for Flash protection.
You can place the security value to the Flash as explained here: http://www.keil.com/support/docs/3237.htm
Hi! Excuse me that i didn't give more explanation.It has to do with flash protection. I have create a "loader",which is composed of many c-codes, variables... I want to fix this "loader" on a particular location of the flash memory and at the same time to make sure that this "loader" can not be write or erase (for example wenn the sector erase for IAP-programing is executed).
The Link that you are given me is only for a value?
Thank you for any answer
This is really to do with the features of the specific chip - not the Keil tools.
Therefore, you might be better asking the chip manufacturer...
Have you checked the Datasheet, Product manual, etc, etc...?
I have bought the MCB2130 by Keil.
Hi! I have checked the LPC213x user manual and i discover that there is one feature "code read protection" for code protection. But the fact is that only ISP commands are affected by this code and IAP commands are not. What i want to use is IAP commands.
May be someboby can help me to find out the solution.
Thank you
Hi!
Please help me.
Thanks
Have you been in contact with the NXP support engineers?