Keil forum Using a .BIN with the build in simulator

State Not Answered
Locked Locked
Replies 2 replies
Subscribers 15 subscribers
Views 2207 views
Users 0 members are here

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Using a .BIN with the build in simulator

Gustavo Vargas over 16 years ago

I have a single .BIN file for an Atmel ARM CPU and wants to load that file in the build in simulator from uVision. Is it possible? How to proced?

0 Reinhard Keil over 16 years ago

I guess *.BIN stands for a binary file. You should make a HEX file first (see http://www.keil.com/support/docs/275.htm). This format can be loaded into the debugger.
Cancel
Up 0 Down

Cancel
0 Gustavo Vargas over 16 years ago in reply to Reinhard Keil

Yes, .BIN means a binary file, thanks for the bin2hex application. But how can I load the .HEX file into the simulator? I tryed to create a project and add this file into the resources, but when I start the simulator I get an error.
Cancel
Up 0 Down

Cancel