arrays and ptrs: what are C_CSTOPTR and C_ISTOPTR for

Next Thread | Thread List | Previous Thread Start a Thread | Settings

Details	Message
Read-Only Author Bahri Okuroglu Posted 2-Nov-2001 20:42 GMT Toolset C51	arrays and ptrs: what are C_CSTOPTR and C_ISTOPTR for Bahri Okuroglu Dear all, I have problems with string in C51, and confused about the array and ptr processing in C51 while investigating the assembly code generated. What is C_CSTOPTR and C_ISTOPTR for in the code? Please note C_CSTOPTR is in char* access code, and C_ISTOPTR is in int[] code. 71 1 unsigned char cp = (unsigned char )malloc(5); 72 1 unsigned char ca[5]; 73 1 unsigned int ia = (unsigned int )malloc(10); 74 1 unsigned int ip[5]; 75 1 76 1 for (i=0; i<5; i++) { 77 2 ca[i] = i; 78 2 cp[i] = i; 79 2 ia[i] = i; 80 2 ip[i] = i; 81 2 } Below is generated for the above code: ; SOURCE LINE # 77 0034 AF00 R MOV R7,i+01H 0036 7400 R MOV A,#LOW ca 0038 2500 R ADD A,i+01H 003A F582 MOV DPL,A 003C E500 R MOV A,i 003E 3400 R ADDC A,#HIGH ca 0040 F583 MOV DPH,A 0042 EF MOV A,R7 0043 F0 MOVX @DPTR,A ; SOURCE LINE # 78 0044 900000 R MOV DPTR,#cp 0047 E0 MOVX A,@DPTR 0048 FB MOV R3,A 0049 A3 INC DPTR 004A E0 MOVX A,@DPTR 004B FA MOV R2,A 004C A3 INC DPTR 004D E0 MOVX A,@DPTR 004E F9 MOV R1,A 004F 850082 R MOV DPL,i+01H 0052 850083 R MOV DPH,i 0055 EF MOV A,R7 0056 120000 E LCALL ?C_CSTOPTR ; SOURCE LINE # 79 0059 E500 R MOV A,i+01H 005B 25E0 ADD A,ACC 005D FF MOV R7,A 005E E500 R MOV A,i 0060 33 RLC A 0061 FE MOV R6,A 0062 900000 R MOV DPTR,#ia 0065 E0 MOVX A,@DPTR 0066 FB MOV R3,A 0067 A3 INC DPTR 0068 E0 MOVX A,@DPTR 0069 FA MOV R2,A 006A A3 INC DPTR 006B E0 MOVX A,@DPTR 006C F9 MOV R1,A 006D 8F82 MOV DPL,R7 006F 8E83 MOV DPH,R6 0071 E500 R MOV A,i 0073 8500F0 R MOV B,i+01H 0076 120000 E LCALL ?C_ISTOPTR ; SOURCE LINE # 80 0079 E500 R MOV A,i+01H 007B 25E0 ADD A,ACC 007D FF MOV R7,A 007E E500 R MOV A,i 0080 33 RLC A 0081 FE MOV R6,A 0082 7400 R MOV A,#LOW ip 0084 2F ADD A,R7 0085 F582 MOV DPL,A 0087 EE MOV A,R6 0088 3400 R ADDC A,#HIGH ip 008A F583 MOV DPH,A 008C E500 R MOV A,i 008E F0 MOVX @DPTR,A 008F A3 INC DPTR 0090 E500 R MOV A,i+01H 0092 F0 MOVX @DPTR,A

Read-Only Author Alex Ruiz Posted 2-Nov-2001 21:51 GMT Toolset C51	RE: arrays and ptrs: what are C_CSTOPTR and C_ISTOPTR for Alex Ruiz Please note C_CSTOPTR is in char access code, and C_ISTOPTR is in int[] code.* Hummmmm, I don't think it's correct because the C_CSTOPTR is in char* ( OK ), but the C_ISTOPTR is in int* code. 71 1 unsigned char cp = (unsigned char )malloc(5); 72 1 unsigned char ca[5]; 73 1 unsigned int ia = (unsigned int )malloc(10); 74 1 unsigned int ip[5]; 75 1 76 1 for (i=0; i<5; i++) { 77 2 ca[i] = i; 78 2 cp[i] = i; 79 2 ia[i] = i; 80 2 ip[i] = i; 81 2 } As far as I'm concerned you chose the variable name based in the method of data access, ca for an array and cp for a pointer ( c = char ). When you used the int data type, probably you mischanged the name. ia is your pointer and the access will use C_ISTOPTR. 0044 900000 R MOV DPTR,#cp 0047 E0 MOVX A,@DPTR 0048 FB MOV R3,A 0049 A3 INC DPTR 004A E0 MOVX A,@DPTR 004B FA MOV R2,A 004C A3 INC DPTR 004D E0 MOVX A,@DPTR 004E F9 MOV R1,A 004F 850082 R MOV DPL,i+01H 0052 850083 R MOV DPH,i 0055 EF MOV A,R7 0056 120000 E LCALL ?C_CSTOPTR ; SOURCE LINE # 79 0059 E500 R MOV A,i+01H 005B 25E0 ADD A,ACC 005D FF MOV R7,A 005E E500 R MOV A,i 0060 33 RLC A 0061 FE MOV R6,A 0062 900000 R MOV DPTR,#ia 0065 E0 MOVX A,@DPTR 0066 FB MOV R3,A 0067 A3 INC DPTR 0068 E0 MOVX A,@DPTR 0069 FA MOV R2,A 006A A3 INC DPTR 006B E0 MOVX A,@DPTR 006C F9 MOV R1,A 006D 8F82 MOV DPL,R7 006F 8E83 MOV DPH,R6 0071 E500 R MOV A,i 0073 8500F0 R MOV B,i+01H 0076 120000 E LCALL ?C_ISTOPTR

Read-Only Author Bahri Okuroglu Posted 3-Nov-2001 14:01 GMT Toolset C51	RE: arrays and ptrs: what are C_CSTOPTR and C_ISTOPTR for Bahri Okuroglu whoops, I mixed the names. :) Anyway, what do C_CSTOPTR and C_ISTOPTR codes do for pointers?

Read-Only Author Jon Ward Posted 3-Nov-2001 22:22 GMT Toolset C51	RE: arrays and ptrs: what are C_CSTOPTR and C_ISTOPTR for Jon Ward Check the following knowledgebase article: http://www.keil.com/support/docs/1964.htm Jon

Read-Only Author Andrew Neil Posted 4-Nov-2001 19:14 GMT Toolset C51	RE: arrays and ptrs: what are C_CSTOPTR and C_ISTOPTR for Andrew Neil Rather than worry about Keil's implementation details, what is your specific problem with strings in C51? Are your problems/confusion specific to C51, or is this a general 'C' language issue? (people often get confused over the similarities & differences of pointers & arrays in 'C'). In the specific case of C51 pointers, note that a C51 pointer contains not only an address but must also define which memory space contains the addres; ie, CODE, DATA, IDATA, PDATA or XDATA. With an array, the memory space is known - and fixed - at compile time. Therefore the compiler doesn't have to allow for all the other memory spaces, and can generate more compact code. What happens to your code sample if you use memory-specific pointers instead of generic?

Read-Only Author Bahri Okuroglu Posted 6-Nov-2001 19:19 GMT Toolset C51	RE: arrays and ptrs: what are C_CSTOPTR and C_ISTOPTR for Bahri Okuroglu Andrew, First thanks for the reply. My compiled code is about 20K, and it contains some string processing code also. I'm experienced with C on Windows and Unix, but inexperienced in embedded world and C51. In general I have problems with strings in C51 (v3.20). I managed to make the code working but have some interesting observations: 1__________________________________ System has an LCD, and some text is displayed on it. When I remove an strncpy() usage in code, all the text to be written is corrupted and some garbage data is shown on LCD. Please note that the code which contains the removed strncpy() is not used when displaying other text on LCD. 2________________________________ In a function, I copy the string given with the parameter, to another string in a system struct. However, I could not copy the string with strncpy(). It simply copies an empty string. When I use memcpy instead of strcpy, everything is OK. 3_______________________________ Another problem is described here: http://www.keil.com/forum/msgpage.asp?MsgID=3529 Please note that I use generic pointers. Because of these problems I could not solve, I try to understand the internal arch. of C51. An additional question: Is passing char[] to a function expecting char* creates a problem?

Read-Only Author Andrew Neil Posted 6-Nov-2001 20:34 GMT Toolset C51	RE: arrays and ptrs: what are C_CSTOPTR and C_ISTOPTR for Andrew Neil I'm afraid there's not enough detail there to draw any conclusions. Can you produce some small code snippets to illustrate the problems, and post them here? Is passing char[] to a function expecting char creates a problem?* In general 'C', they should be equivalent; In C51, I think you may well have to consider carefully the memory spaces involved?

Next Thread | Thread List | Previous Thread Start a Thread | Settings