8051 and stepper motor

 8051 and stepper motor

hello everyone. i am learning 8051.

i want code for interfacing stepper motor with 8051 in assembly language and in "C" language can anyone help me????????

thank u.........

 RE: 8051 and stepper motor

"i am learning 8051"

Perhaps you should also learn Google...?

 RE: 8051 and stepper motor

I want code ...can anyone help me?

I can, I work as a consultant if you send me the specifications, I will send you a quote.

Erik

 RE: 8051 and stepper motor

You may use this http://www.embedded.com/showArticle.jhtml?articleID=56800129

 RE: 8051 and stepper motor

excellent link

Erik

 RE: 8051 and stepper motor

AS you learning 8051. that mean's you are not knowning the assembly language. what about the "c"????? As per Viktor Bucher suggession, study the total detail's of the stepper motor.

you required it for collage project or for the hobby project ?

Don't go for the any kind of blind and short-cut work,

that will not help u in any manner

go through the following book it will solved your all problem,

******The 8051 Microcontroller and Embedded System***
************** Using assembly and c****************

""the code is also in this book""

RG
SAMEER BHOITE.

 Book

"go through the following book it will solved your all problem,

******The 8051 Microcontroller and Embedded System***
************** Using assembly and c****************"

If you're going to recommend a book, be sure to give at least the Author(s).

A full citation should include the Publisher and ISBN.

There are booklists here:
http://www.keil.com/books/8051books.asp
http://www.8052.com/books.phtml

And here's a tutorial on the 8051:
http://www.8052.com/tutorial.phtml

Don't forget the so-called "bible" for the 8051:

Chapter 1 - 80C51 Family Architecture:
http://www.nxp.com/acrobat_download/various/80C51_FAM_ARCH_1.pdf

Chapter 2 - 80C51 Family Programmer's Guide and Instruction Set:
http://www.nxp.com/acrobat_download/various/80C51_FAM_PROG_GUIDE_1.pdf

Chapter 3 - 80C51 Family Hardware Description:
http://www.nxp.com/acrobat_download/various/80C51_FAM_HARDWARE_1.pdf

 RE: Book

sorry for the stupidity
I did not mention the author and publication

here i mention MUHAMMAD ALI MAZIDI JANICE GILLISPIE MAZDI ROLIN D. McKINLAY

second edition PEARSON EDUCATION

 RE: Book

here i mention MUHAMMAD ALI MAZIDI JANICE GILLISPIE MAZDI ROLIN D. McKINLAY second edition PEARSON EDUCATION

still an ancient text (copyright 2000).

Erik

I have not read the book, but i have read much by Craig Steiner and think his book might be a better choice.

you can get a glace at his style here http://www.8052.com/tutorial.phtml

Erik

 Book by Craig Steiner

"i have read much by Craig Steiner ... you can get a glace at his style here http://www.8052.com/tutorial.phtml "

And you can buy his book here: http://www.8052.com/book/

 do not buy it

M. Mazidi and J. Mazidi, The 8051 Microcontroller and Embedded System, Prentice Hall, 1999.

Hopelessly outdated 8 years in this area is an eon

Erik

 RE: Outdated

"Hopelessly outdated - 8 years in this area is an eon"

The principles will remain valid - after all, the so-called "bible" is dated 1995, but we don't dismiss that!

However any references to specific chips, as you say, should almost certainly be considered of historical interst only!

Who mentioned 8255...?! ;-)

 RE: 8051 and stepper motor

thanx for reply. I know assembly language and c-learning bacis. and practicing codes. I will follow your advise. thank u all

 RE: 8051 and stepper motor

c-learning bacis

do that on the PC, it is so much easier to learn on a unit that 'has it all'

Erik

 RE: 8051 and stepper motor

Read majidi or ayla in detail, u will get it

 RE: 8051 and stepper motor

PLEASE SEND E-MAIL TO ME REGARDING ASSEMBLY LANGUAGE PROGRAM

 RE: 8051 and stepper motor

hello, i want the connection the 8051 through computer port with help of stepper motor

 RE: 8051 and stepper motor

I think it is easier to connect the 8051 to a computer port with the help of a serial cable.

 RE: 8051 and stepper motor

In what way do you want the stepper motor to help to connect the 8051 to the computer port??

Are you trying to make a robotic plug inserter?!

 RE: 8051 and stepper motor

be nice guys (I confess I was tempted too) the guy is trying his best English.

saqib;
nobody will help you with connecting a stepper motor in the form of giving you the code and schematic, that would be 'cheating'

You need to describe in detail
what you have done
what the problem with it is
which components you are using Micro, motor interface etc)

Erik

 RE: 8051 and stepper motor

OK, isn't Jones supposed to be the definitive website on the subject:

http://www.cs.uiowa.edu/~jones/step/

And Silicon Labs have some App Notes all about motors

 RE: 8051 and stepper motor

yes,well what sort of project you are involved in.i have done the interfacing of stepper motor with 8051.